Years Active 2018-2021
WT-1 and WR-1 are diminutive wireless transmitter and complementary receiver modules measuring just 6 cm round by 4 cm deep. They can be used together to create a simple wireless zone extension, or to enable wireless rear speakers in a home theatre system.
Please note: The WT-1 and WR-1 cannot be used to power speakers directly.
The WT-1 and WR-1 are the ideal partners for placing between sources and amplifiers or amplifier and subs.
The WT-1 can be used in conjunction with the WS-10 subwoofer to create a wireless sub-woofer system for use with any AV receiver or amplifier with LFE or stereo outputs. The units configured are stereo and can transmit full audio band stereo in a lossless, uncompressed format; therefore preserving the signal quality and integrity. A single LFE channel can be used for sub-woofer applications.
This module is ultra-compact and can be hidden out of sight a the back of an equipment rack, amplifier or TV. Once the modules are switched on, they will automatically lock on to each other and connect. No buttons to press or pairing is required. The set up process could not be any simpler.
A non-slip silicon rubber base is designed to not mark or leave residue on surfaces.
* WT1/WR1 are designed and approved to ErP standards and comply with Eco design for energy related products Regulations for Energy-Related Products Directive 2009/125/EC. This means the units consume less than 0.5Watts of power in standby mode.
Compact Wireless transmitter module
20 Hz – 20 kHz
Lossless/uncompressed Digital 2.4 GHz band
10 m (dependant on building construction)
> 20K Ohms
Analogue stereo inputs/outputs (RCA)
External plug type power supply (94-264 VAC) 5v output with world plug pins
5v @ 50mA
LED – on/connected
< 0.5 Watts standby - ErP certified
68 mm x 32 mm (211/16 x 11/4")
ETL/ CE/ Fcc/CB/ Erp
5.76 kg (12 lb 11 oz)