Years Active 2018-2022
IA800-2C brings our Connect IP interface, which can be accessed by any device connected to the internet with a web browser on the same network. Delivering up to 800 watts per channel, this 2-channel will directly drive 70 V line speakers without a line matching transformer.
Important: Click here to install the latest IA800-2C firmware. Please ensure the firmware is up to date before downloading IR Codes, IP Codes or the Crestron/Control4 drivers, which can be found in the Downloads area.
The IA800-2C is part of our Connect Amplifiers division, bringing our Connect IP interface, a web application which can be accessed by any device connected to the internet with a web browser on the same network.
Fluently delivering up to 800 watts per channel, this two-channel powerhouse can directly drive 70 V line speakers without a line matching transformer. Each channel has a volume adjustment on the front panel and the 2U high case universally fit into most racks whilst delivering 93% energy efficiency. And even though its likely to live its live on the rack, our design team have produced an especially handsome Installation Amplifier. Ready and waiting for any project.
Create the ultimate cinema experience with Cinergy, through the IA800-2C Installation Amplifier.
Works with –
This product is now available to use with home theatre design software, The Cinema Designer. Read more.
2 (1 Stereo Pair)
2000 W (1CH)
20 K ohms
100 mV / 1 W, 2200 mV – Full power
-100 dB (20 Hz – 20 kHz)
5 Hz – 50 kHz
86.8 x 438 x 438 mm (37/16 x 171/4 x 1613/16")
97.2 x 438 x 438 mm (313/16 x 171/4 x 1613/16")
482 mm (19")
TCP/IP (RJ-45 10/100 Base T)
100 –120 V @ 60 Hz
220 – 240 V @ 50 Hz
100-120VAC: T15AL/250V AC
220-240VAC: T10AL/250V AC
<0.5 W (green mode)
9.2 kg (20 lb 4 oz)