How do I set up AV positioning with Silver Series 7G speakers?

Please refer to the illustration below for the ideal angles and positions of each speaker in your surround system.

The speakers should be distanced from the wall according to the requirements of the speaker, which are listed in the 2-Channel Positioning section of the manual (page 2). However, due to AV receiver crossover filter settings, they may be positioned closer to the wall. Experimentation is advised.

If the sound is too bass heavy or there is a bass boom from the room when playing music (without a subwoofer), try moving the loudspeakers slightly further away from the wall(s). If this is not possible, then try the supplied port bungs. In a system with a subwoofer, try adjusting the crossover frequency settings for the speakers and/or sub or changing the subwoofer’s position.

The Silver C250 7G centre channel speaker should be positioned so that it is pointing at the viewing position and at approximate ear height.

NOTE: The images are for illustrative purposes only. ⁃ A. Side surround speakers ⁃ B. Rear surround speakers ⁃ A 7.1 surround system will make use of side (position A) and rear speakers (position B) to create a full 360° soundstage; if setting up a 5.1 system, you can place your surrounds in position (A).