Monitor MRW-10 - (Discontinued)

Monitor MRW-10

Years Active 2020-2022

The muscular Monitor MRW-10 powered subwoofer delivers a thunderous bass down to below 30 Hz and offers a totally immersive movie, music, or gaming experience.


The Monitor MRW-10’s rigid cabinet is made from 18 mm thick MDF and accommodates a 10" long-throw MMP II bass driver and a rear port that allows optimal output from the powerful on-board 100 W class D power amplifier.

The Monitor MRW-10 boasts an array of features dedicated to optimising a home theatre system. There are three pre-set EQ mode settings (Music, Movie, Impact) to offer a level of adjustment for all rooms and tastes, and the controls use an advanced DSP based architecture to provide the ultimate in audio flexibility.


This product is now available to use with home theatre design software, The Cinema Designer. Read more.


Monitor MRW-10 Key Features

  • 10" MMP II long throw subwoofer driver
  • Rigid MDF cabinet with rear porting
  • Powerful 100 W Class D power amplifier – high efficiency and punchy bass delivery
  • Switch mode power supply, designed to deliver high continuous rating and provides the instantaneous delivery of high current when required
  • DSP processing with all control features and crossover performed in the digital domain
  • Three pre-set EQ mode settings. Music / Movie / Impact
  • 12 V trigger – provides switching control from AV amp, processor, or home automation control system
  • 18 mm thick MDF construction
System Format

Rear ported bass reflex cabinet

Lower Frequency Limit

30 Hz (-6 dB)

Upper Frequency Limit

Variable 50 – 120 Hz @ 24 dB/Octave

Amplifier Output

100 W RMS

Amplifier Classification

Class D with Switch mode PSU

Bass EQ Profiles

Music / Movie / Impact

Phase Control

0 – 180°

Auto Sensing

>3.5 mV

Input Level Requirements

Standby after approximately 15 minutes if no signal sensed

Drive Unit Complement

1 x 10" MMP II long throw driver

Input Impedance

>20 K ohms

Mains Input Voltage

110 – 120 Vac – 50 – 60 Hz
220 – 240 Vac – 50 – 60 Hz. Selectable

Fuse Specification

110 – 120 VAC – T4AL/250VAC
220 – 240 VAC – T4AL/250VAC


2 x Stereo RCA, 1 x LFE RCA connection
12 V trigger (3.5 mm mono mini-jack)

External Dimensions (Including Grille and Feet (H x W x D))

336 x 320 x 350.6 mm (131/4 x 125/8 x 1313/16")

Standby Power Consumption

<0.5 W standby


10.54 kg (23 lb 4 oz)

Sold As

Single Unit

Product Video

Related Products

Leave a product review

Monitor MRW-10