GXW15 - (Discontinued)

GXW15

Years Active 2010-2015


In this gloriously glossy, rigid compact subwoofer, is an ultra-long throw 15” C-CAM bass driver, triple suspended and under the control of a 650W D2Audio® Class D amplifier.

Technology

  • Ultra long throw 15” C-CAM (Ceramic-Coated Aluminium/Magnesium) driver featuring triple suspension
  • Large black anodized 3” voice coil and double stack motor system provides high power handling and low distortion
  • Carefully optimized motor system design to reduce heat and improve efficiency
  • Powerful 650Watt DSP Controlled amplifier (D2 Audio™)
  • Advanced full bridge switch mode power supply (SMPSU) Capable of delivering over 1200 watt peak power
  • 12V trigger - provides switching control from A.V amp or processor
  • Rigid, 25 mm (1”) thick M.D.F construct
  • Heavy radial cabinet bracing with separate amplifier partition
  • Front mounted control panel for easy access and viewing
  • The LEO™  system provides Automatic Room Mode Correction (ARMC) for easy set up and perfect sound quality
  • Remote control with 4 user EQ settings
  • Selected real wood veneer or high gloss piano finishes
Equalisation

4 Settings (Off/Music/Movie/Impact)

Phase Control

0-90-180-270 degrees

Auto Sensing Input Requirements

Line Level > 2mV. Standby after 10 minutes if no signal sensed

Digital Volume Level

-60 to +10 dB in 1 dB increments

Drive Unit Complement

1 x 15” C-CAM sub-woofer driver featuring triple suspension
3” long throw voice coil

Trigger Input

3.5 mm mono jack socket

Connection

Stereo RCA in/out
LFE in/out
12V Trigger in (3.5mm mono jack)
LEO* - 3.5mm Microphone input jack (microphone supplied)

Input Impedance

20 K Ohms

Dimensions (H x W x D)

431.8 x 419.1 x 419.1 mm (17 x 161/2 x 161/2 Inches)

Grille Depth

28 mm (11/8 Inches)

Weight

35.3 kg (77.6 lbs)

Mains Input Voltage

100 - 120 Vac / 220 - 240 Vac 50/60 Hz (Factory preset)

Electrical Certifications

CE/CB/ETL/Fcc/ErP (Energy saving compliant)

Power Consumption

Maximum 1000 W. Standby < 0.5 W (ErP Compliance)

Fuse Type

20 mm UL/VDE (Value is region specific)

IR Remote Control Code

NEC SH6122