Gold W15 - (Discontinued)

Gold W15

Years Active 2014-2018


It may deliver taut gut-churning bass all the way down to a seismic 18 Hz, but the Gold W15 is also an intelligent design, featuring an advanced automatic room correction system called LEO™ (Listening Environment Optimizer).

Reviews and Awards

LEO simply and automatically eliminates the detrimental bass boost of boundaries and corners through the use of a microphone and test tones.

The Gold W15's sealed enclosure and front-firing driver make it easy to install, and calibration from the front-mounted controls and dimmable LED display is simple, even from a distant position. It's equipped with a 12 V trigger and remote control with four user EQ pre-sets.

 


Ce produit est désormais intégré au logiciel de création home cinéma The CEDIA Designer. Cliquez ici pour plus d’informations.


 

Technology

  • Ultra long throw 15" C-CAM (Ceramic-Coated Aluminium/Magnesium) driver featuring triple suspension
  • Large black anodized 3" voice coil and double stack motor system provides high power handling and low distortion
  • Carefully optimized motor system design to reduce heat and improve efficiency
  • Powerful 650 Watt DSP Controlled amplifier (D2 Audio™)
  • Advanced full bridge switch mode power supply (SMPSU) Capable of delivering over 1200 watt peak power
  • 12 V trigger - provides switching control from A.V amp or processor
  • Rigid, 25 mm (1") thick M.D.F construct
  • Heavy radial cabinet bracing with separate amplifier partition
  • Front mounted control panel for easy access and viewing
  • The LEO™  system provides Automatic Room Mode Correction (ARMC) for easy set up and perfect sound quality
  • Remote control with 4 user EQ settings
  • Selected real wood veneer or high gloss lacquer finishes.
System Format

Sealed Cabinet. 25 mm M.D.F construction with internal bracing. Sealed amplifier compartment

Lower Frequency Limit

18 Hz

Upper Frequency Limit

40 — 120 Hz Variable

Low Pass Filter Alignment

Active 4th order 24dB/octave (6/12/18/24 dB user adjustable)

Amplifier Output

650 watts Continuous. 1200 watts Peak

Amplifier Classification

D2AudioTM DSP controlled, Class-D amplifier system. High current switch mode power supply (SMPSU)

Equalisation

4 Settings (Off/Music/Movie/Impact)

Phase Control

0-90-180-270 degrees

Auto Sensing Input Requirements

Line Level > 2mV. Standby after 10 minutes if no signal sensed

Digital Volume Level

-60 to +10 dB in 1 dB increments

Drive Unit Complement

1 x 15" C-CAM sub-woofer driver featuring triple suspension
3" long throw voice coil

Trigger Input

3.5 mm mono jack socket

Connection

Stereo RCA in/out
LFE in/out
12 V Trigger in (3.5 mm mono jack)
LEO* - 3.5 mm Microphone input jack (microphone supplied)

Input Impedance

20 K Ohms

Dimensions (H x W x D)

430 x 400 x 400 mm (1615/16 x 153/4 x 153/4")

Grille Depth

28 mm (11/8")

Mains Input Voltage

100 - 120 Vac / 220 - 240 Vac 50/60 Hz (Factory preset)

Electrical Certifications

CE/CB/ETL/Fcc/ErP (Energy saving compliant)

Power Consumption

Maximum 1000 W. Standby < 0.5 W (ErP Compliance)

Fuse Type

20 mm UL/VDE (Value is region specific)

IR Remote Control Code

NEC SH6122

Weight (unpacked)

35.3 kg (77 lb 10 oz)

Related Products

Leave a product review

Gold W15