Years Active 2018-2022
The IA150-8C enables up to eight (4 stereo pairs) channels of 150 watts of power at 4 ohms. It’ll fit 1U rack height and, it employs our Connect IP interface, a web application, which can be accessed by any device connected to the internet with a browser on the same network.
Important: Click here to install the latest IA150-8C firmware. Please ensure the firmware is up to date before downloading IR Codes, IP Codes or the Crestron/Control4 drivers, which can be found in the Downloads area.
The Monitor Audio Installation Amplifiers are configurable to 1, 2, 3, 4, 5, 6, or 12 channels. The IA150-8C enables up to eight (four stereo pairs) channels of 150 watts of power at four ohms. It’ll fit 1U rack height and, as a member of the Monitor Audio ‘Connect’ division, it employs our Connect IP interface, a web application which can be accessed by any device connected to the internet with a web browser on the same network.
The IP control is via the RJ-45 input, controlling power On/Off, volume, muting, and input source selections. Perfectly prepared for any project, the IA150-8C’s industry standard removable block connectors accept up to 12-gauge (3.5 mm2) cable. Together with the rest of the Installation Amplifier range, the IA150-8C provides the brain as well as the brawn for the mightiest of projects.
Create the ultimate cinema experience with Cinergy, through the IA150-8C Installation Amplifier.
Works with –
This product is now available to use with home theatre design software, The Cinema Designer. Read more.
8 (4 Stereo Pairs)
300 W (4CH)
20 K ohms
100 mV / 1 W, 1140 mV – Full power
-100 dB (20 Hz – 20 kHz)
5 Hz – 50 kHz
42.4 x 438 x 427 mm (111/16 x 171/4 x 1613/16")
52.8 x 438 x 427 mm (21/16 x 171/4 x 1613/16")
482 mm (19")
TCP/IP (RJ-45 10/100 Base T)
100 –120 V @ 60 Hz
220 – 240 V @ 50 Hz
10 A (T10AL ~ 250VAC)
<0.5 W (green mode)
7.45 kg (16 lb 6 oz)