Monitor MRW-10

Monitor MRW-10

The muscular Monitor MRW-10 powered subwoofer delivers a thunderous bass down to below 30 Hz and offers a totally immersive movie, music, or gaming experience.


The Monitor MRW-10’s rigid cabinet is made from 18 mm thick MDF and accommodates a 10" long-throw MMP II bass driver and a rear port that allows optimal output from the powerful on-board 100 W class D power amplifier.

The Monitor MRW-10 boasts an array of features dedicated to optimising a home theatre system. There are three pre-set EQ mode settings (Music, Movie, Impact) to offer a level of adjustment for all rooms and tastes, and the controls use an advanced DSP based architecture to provide the ultimate in audio flexibility.


Monitor MRW-10 Key Features

  • 10" MMP II long throw subwoofer driver
  • Rigid MDF cabinet with rear porting
  • Powerful 100 W Class D power amplifier – high efficiency and punchy bass delivery
  • Switch mode power supply, designed to deliver high continuous rating and provides the instantaneous delivery of high current when required
  • DSP processing with all control features and crossover performed in the digital domain
  • Three pre-set EQ mode settings. Music / Movie / Impact
  • 12 V trigger – provides switching control from AV amp, processor, or home automation control system
  • 18 mm thick MDF construction
System Format

Rear ported bass reflex cabinet

Lower Frequency Limit

30 Hz (-6 dB)

Upper Frequency Limit

Variable 50 – 120 Hz @ 24 dB/Octave

Amplifier Output

100 W RMS

Amplifier Classification

Class D with Switch mode PSU

Bass EQ Profiles

Music / Movie / Impact

Phase Control

0 – 180°

Auto Sensing

>3.5 mV

Input Level Requirements

Standby after approximately 15 minutes if no signal sensed

Drive Unit Complement

1 x 10" MMP II long throw driver

Input Impedance

>20 K ohms

Mains Input Voltage

110 – 120 Vac – 50 – 60 Hz
220 – 240 Vac – 50 – 60 Hz. Selectable

Fuse Specification

110 – 120 VAC – T4AL/250VAC
220 – 240 VAC – T4AL/250VAC


2 x Stereo RCA, 1 x LFE RCA connection
12 V trigger (3.5 mm mono mini-jack)

External Dimensions (Including Grille & Feet (H x W x D))

336 x 320 x 350.6 mm (131/4 x 125/8 x 1313/16")

Standby Power Consumption

<0.5 W standby


10.54 kg (23 lb 4 oz)

Product Video
Related Products