CW8

CW8


The new CW8 places all the power in the hands of installer and client. Engineered for control in operation, bass quality and concealment in-room, the compact CW8 cube will add explosive bass frequencies to music and AV systems when tucked behind furniture on room boundaries.

Applications

Each little bass-engine is generously specified with custom installation in mind, providing versatile input and control options including RS232 and a dedicated ‘SubConnect’ PC applet via a wired USB interface.

The compact rigid 18 mm MDF cubic cabinets with regular 25.5 cm dimensions incorporate no fewer than three robust, similarly sized 8” C-CAM drivers. Each system array comprises an active high-excursion drive unit powered and trimmed by potent DSP-tuned amplification, together with twin side-mounted ABRs (Auxiliary Bass Radiators).


Technology

  • Ultra-compact ‘cube’ shape designs
  • Twin side-mounted ABRs for increased output and reduced distortion. Higher output than a sealed box and better control and zero air noise compared to a ported box
  • High excursion woofers featuring signature C-CAM cone technology
  • High-power Class-D amplifier delivering 400 watts
  • DSP processing –all functions performed in the digital domain for precise control
  • RS-232 for integration with system controllers
  • SubConnect’ PC Applet for full feature adjustment, installer set-up and firmware update using USB
  • LFE Balanced XLR and unbalanced RCA Inputs
  • Stereo RCA line level inputs
  • Phase switch (0-180 degrees)
  • 12 V trigger and auto signal sensing with timer control
  • 4 x pre-set equalisation optimised for music, movie, flat and impact with customisation through SubConnect Applet
  • Robust metal mesh grille on front woofer
  • Rigid MDF cabinet construction with durable vinyl finish

     

System Format

Active sub-woofer system – twin ABR. 18 mm MDF cabinet (CARB2 approved)

Lower Frequency Limit

35 Hz (-6 dB)

Amplifier Output

350 W RMS @ < 1% THD+N

Maximum SPL

105.8 dBA

Amplifier Classification

Class D amplifier with Switch mode power supply (SMPSU)

Inputs

Stereo RCA LFE (RCA) LFE Balanced (XLR)

EQ

Flat/ Music/ Movie/ Impact

Phase Control

0 & 180 degrees

Auto Sensing

LFE Input <2mV Auto wireless audio input signal detection

Auto Standby

After approximately 15 minutes if no signal sensed Wireless audio source turned off

Drive Unit Complement

1 x 8" (200 mm) C-CAM long throw driver, 2 x 8" (200 mm) ABR

Input Impedance

> 20 ohms

Mains Input Voltage

110 - 120 Vac / 220 - 240 Vac 50/60Hz (Manual Switch selection)

Dimensions (Including Feet (H x W x D))

270 x 260 x 276 mm (105/8 x 101/4 x 107/8")

Trigger Input

5 - 12 V via 3.5mm mono mini-jack socket

Power Consumption

Standby: < 0.5 W (ErP approved) Typical Idle: < 10 W Max Rated: 400 W

Related Products